EXTEROR 500 IMAGE PROJECTOR Tm
FULLY WEATHERIZED OUTDOOR LED LIGHTING FIXTURE
 
 
 
 
 
 
HIGHLIGHTS
 

 

• Flat-field, high-contrast image projection

• Fully weatherized for trouble-free use with minimal maintenance in outdoor installations

• Packed with features, allowing huge creativity in setting up exciting lighting effects

 

 
 
 

OVERVIEW

The Exterior™ Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing. Using advanced LED technology, it offers outstanding energy efficiency, compact size and unlimited creative possibilities.

 

 

FEATURES

• Up to 6100 lumens output with 4 beam angles variants from narrow to wide

• Powerful close-range and long-range projection

• Flat-field, high-contrast image projection based on high-power LED engine

• 4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)

• Crisp image projection

• Rugged IP66-rated housing

• Minimal maintenance –low total cost of ownership

 
 
 
 
KEY MESSAGES
 

 

FOUR BEAM ANGLES

From 12° to 51°, select the right beam angle for the specific installation allowing for best possible image projection.

 

MULTIPLE EFFECTS LAYERS

Allows a range of lighting effects creativity many different looks can be achieved with the same fixture.

 

 

GOBO ACCESSIBILITY

The accessible service lid decreases cost, time, and risk to change gobos and colors.

 

FULLY CONVECTION-COOLED IP66 HOUSING

Ideal for minimal maintenance, low total cost of ownership, and resiliency to weather and other environmental conditions.

 

 

 

 

 

 
 
 
TECHNICAL SPECIFICATIONS
 

THERMAL

Cooling...................................................Convection, internal forced air

Maximum ambient temperature

(Ta max.) ................................................ 45° C (113° F) *

Minimum ambient temperature

(Ta min.) ................................................. -30° C (-22° F)**

*Above this temperature, the fixture regulates output to protect from overheating.

**For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)

 

 

 

 

 

 

 

 

 

APPROVALS

EU safety.................................EN 60598-2-1, EN 60598-2-5

                                               (EN 60598-1), EN 62471, EN 62493

EU EMC ..................................EN 55015, EN 55032, EN 55103-2,

                                                EN 61000-3-2, EN 61000-3-3,

                                                EN 61000-4-2, EN 61000-4-3,

                                                EN 61000-4-4, EN 61547

US safety .................................ANSI/UL 1598

US EMC ...................................CFR 47 Part 15 Class A

Canadian safety .........................CSA C22.2 No 250.0

Australia/NZ ...............................RCM

 

 

 

 

 

 

 

 
 
 
GOBO WHEEL
 
 
 
COLOR WHEEL
 
 
 
DIMENSIONS

 

PHYSICAL

Length.................................................... 415 mm (16.4 in.) Width...................................................... 293 mm (11.6 in.) Height..................................................... 444 mm (17.5 in.) Weight.................................................... 17.5 kg (38.6 lbs.)

All figures include mounting yoke

        
 

   

                                                 
 
 
PROJECTION DATA - GOBO WITH MAX. IMAGE SIZE

 

 

TECHNICAL SPECIFICATIONS
 

 

 

DYNAMIC EFFECTS

Color wheel..................................... 8 interchangeable colors + open

Gobo wheel .................................... 6 rotating gobos plus open,                                                                             indexing, variable rotation

Gobo animation................................Variable speed linear

                                                       animation effect

Prism...............................................Prism wheel with 2 interchangeable                                                                  prisms, prism rotation and indexing

Frost (wash effect)............................Motorized variable

Focus..............................................Motorized, variable 3 m (9.8 ft.) to                                                                   infinity

Shutter ...........................................Strobe and pulse effects, instant                                                                       open and blackout

Dimming .........................................Electronic, constantly variable

                                                       0-100%, 16-bit control

 

CONTROL AND PROGRAMMING

Control options ................................DMX, RDM, standalone DMX

channels......................................... 13

Configuration, addressing and status ..Onboard control panel with OLED   

                                                        display

Control resolution ............................. 8-bit DMX control 16-bit DMX 

                                                        control of intensity, focus and gobo                                                                  rotation/indexing angle.

DMX compliance ...............................USITT DMX512-A

RDM compliance................................ANSI/ESTA E1.20

 

 

OPTICS

Light source....................................... 230 W white light LED engine

LED manufacturer ...............................Prolight Opto

CRI (Color Rendering Index) ................ 72

Color temperature............................... 8300 K

LED lifetime ...................................... 20 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer's test conditions

 

 

CONSTRUCTION

Housing...............................................Cast aluminum

Finish .................................................Hard anodized, metallic grey lacquered

Front glass.......................................... 5 mm (0.2 in.) anti-reflection coated tempered glass

Ingress protection ................................IP66

Corrosion resistance ............................C5-M (very high corrosivity / marine,

                                                           ISO 12944)

Impact resistance ................................IK08 (with control panel display                                                                             cover plate installed)

EPA (Effective Projected Area).............. 0.15 m2

RoHS compliant

 

 

GOBOS

Suitable material......................Borosilicate glass, coatings heat-resistant to 450°C (842° F)

Alternative material...................Aluminum 1060, paint on front lens side, 450° C (842° F) HT paint

Gobo diameter ........................30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)

Maximum image diameter ....... 23 mm (0.91 in.)

Glass gobo thickness, minimum........... 1.1 mm ±0.1 mm (0.045 ±0.004 in.)

Glass gobo thickness, maximum.......... 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)

Aluminum gobo thickness .......... 0.5 mm ± 0.02 mm (0.020 in. ± 001 in.)

 

INSTALLATION

Orientation.................................Any (sides must be kept                                                                         vertical)

Mounting...................................Adjustable yoke

Minimum distance to illuminated surfaces .......... 0.5 m (20 in.)

Location ...................................Suitable for wet locations.

                                                 Do not immerse in water.

 

CONNECTIONS

Power cable entry.......................IP68 cable gland

Power connection...................... 1.8 m (5.9 ft.) cable tail with bare ends

Power cable type .......................EU models: H07RN-F 450/700V, Ø10 mm US models: SJTW 14AWG, 300V, Ø9.3 mm

Data cable entry..........................IP68 cable gland

Data connection......................... 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

 

ELECTRICAL

AC power................................... 100-240/277 V nominal, 50/60 Hz Power supply .............................Auto-ranging electronic switch-mode                                                       Typical half-cycle RMS

inrush current............................. 8.4 A Surge protection................................... 4 KV

Idle power (zero intensity,

no effects applied)....................... 32 W, 0.3 A

 

TYPICAL POWER AND CURRENT

110 V, 60 Hz............................... 320 W, 2.9 A, PF 0.977

230 V, 50 Hz............................... 310 W, 1.4 A, PF 0.971

277 V, 60 Hz............................... 305 W, 1.2 A, PF 0.950

Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%

 

 

 

 
 
 
×

มีข้อผิดพลาด

คุณไม่มีสิทธิ์ในการดูข้อมูลในส่วนนี้